1940s Regal Cutaway Archtop Guitar Guitar has a solid carved spruce top, laminated maple sides and back.
Kluson Machines
Ebony Fingerboard
Ebony Bridge
Bone Nut
1 13/16" Nut
1 1/2" Nut String Spacing
2 1/8" Bridge String Spacing
$1100.00 Includes Shipping
To purchase go to SOLD
1945 SS Stewart Archtop Guitar
Model Number 9010
Serial Number 6615
$450.00 Includes Shipping
1997 Dearstone SD-18
Spruce Top
Mahogany Back, Sides and Neck
Ebony Fingerboard, Bridge and Bridge Plate
$3500.00 Includes Shipping
CLICK HERE to see and hear this guitar played by Shawn Brock
2020 Dearstone Mandolin Model # A-5LC Serial # 148SM
Red Spruce Top
Maple Back, Sides and Neck
Ebony Fingerboard and Bridge
Kluson Tuning Machines
Mandolin built to the only Loar signed A-5 Gibson specs.
$8000.00 Includes Shipping
l
1993 Dearstone Mandolin Model F-5 Serial # 1010
Red Spruce Top
Maple Back, Sides and Neck
Ebony Fingerboard and Bridge
Schaller Tuning Machines
Lacquer Finish
$5000.00 Includes Shipping
To purchase go to SOLD
1999 Dearstone Mandolin Model F-1 Serial # 100CM
Western Red Cedar Top
Maple Back, Sides and Neck
Ebony Fingerboard and Bridge
Grover Tuning Machines
Oil Varnish Finish
$8000.00 Includes Shipping
SOLD
2019 Dearstone HD-23 B
Red Spruce Top
Brazilian Back, Sides
Mahogany Neck
Rosewood Fingerboard and Bridge
Gotoh Tuning Machines
$6500.00 Includes Shipping
2021 Dearstone DAT-16 Archtop Guitar
Western Red Cedar Top
Maple Back, Sides and Neck
Walnut Fingerboard and Rosewood Bridge
Closed Tuning Machines
$5000.00 Includes Shipping
Harmony H1260 Sovereign Conversion
Spruce Top
Mahogany Back, Sides and Neck
Rosewood Fingerboard, Bridge and Bridge Plate
The guitar has been refinished.
The above neck crack has been repaired.
This Harmony has been rebraced. The above picture
shows the new bracing. Brace wood is Red Spruce.
$1000.00 Includes Shipping
This is a 1920s B & J Catalog Company Parlor Guitar Sold in the 1920s
It has a 13 7/16" lower bout and has a 19" body length. It has a 25 1/2" scale.
I replaced the fingerboard with an ebony one. I installed an aluminum bar in the neck.
The top is Spruce and the back and sides is Oak.
$1000.00 Includes Shipping
